The Ergosphere
Wednesday, November 09, 2005

Starting the cycle

(The compulsion leapfrogged this impromptu piece past everything else.  Surprise.)

In the news, a specialist in Fischer-Tropsch synthesis (Rentech) has signed a deal to purchase the outstanding shares of Royster-Clark Nitrogen, Inc (h/t:  GCC).  The major asset of RCI appears to be a Danville, Illinois fertilizer plant.  Nitrate production in N. America has been mostly shut down due to high natural gas prices (natural gas is the standard feedstock used to make hydrogen for Haber synthesis of ammonia).  Rentech intends to build a set of coal gasifiers on the site to supply hydrogen to the ammonia plant (boosting its capacity from 830 tons/day to over 900 tons/day), as well as creating 87 million gallons per year of motor fuel by Fischer-Tropsch synthesis and generating electricity.  The exact breakdown of the plant's output is not specified, but it is stated that it will consume 5200 tons/day of coal which is "the commercial equivalent capacity of a 650 megawatt Integrated Gasification Combined Cycle (IGCC) power plant."

This may be a step backward for CO2 emissions, but it's a step forward for reliability of US energy supplies.  But it's not the end.  A plant which burns coal in a wet-slagging gasifier has the potential to burn many other things besides.  The possibilities include charcoal and raw biomass.

Anyone who has travelled through southern Illinois and the neighboring area of Indiana has seen that farming is very big.  Corn is king.  Corn byproducts, such as leaves and stalks (stover) and cobs are certainly available in abundance.  If these farms are typical, much of this material goes to waste.  It therefore represents several unrealized potentials:


Fischer-Tropsch synthesis requires a synthesis gas consisting of mostly carbon monoxide and hydrogen.  Methane is undesirable (too stable), and larger molecules ditto.  The gasifiers used to make F-T synthesis gas are almost always high-temperature, entrained-flow units burning finely powdered coal; the gasifiers are engineered to break down their inputs into the simplest molecules possible.  It stands to reason that a machine for burning finely-powdered carbonaceous material may not be overly fussy about its exact diet.

The Wabash River IGCC plant (using E-gas gasifiers) burns coal or petroleum coke with equal facility, and it appears likely at first glance that similar gasifiers could also process charcoal with relative ease.  Raw biomass would be more difficult; fibrous materials cannot be handled as easily as powders, but advances in processing may make this feasible.  I'll speculate on both possibilities.

Getting back to Danville, the re-engineered fertilizer plant will consume 5,200 tons/day of coal, or 1.90 million tons/year.  Assuming 25 million BTU/ton of coal, this is 47.4 trillion BTU/year.  (The article states this as the equivalent of a 650 MW IGCC plant; this appears to be based on an assumption of roughly 41% efficiency.)  From this it will produce 87 million gallons/year of F-T motor fuel (roughly 12.8 trillion BTU worth), 330,000 or more tons of fixed nitrogen, and an unspecified amount of electricity.

The energy supply

At a typical yield of 150 bu/ac, corn yields approximately 2.5 dry tons of excess stover (not needed for erosion control) per acre.  If it contains 15.8 million BTU per dry ton, the yield is 39.5 million BTU/ac; if it can be processed into charcoal at 28% yield and 15,000 BTU/lb (30 million BTU/ton), each acre could produce 0.70 tons of charcoal per year yielding 21 million BTU/ac.

There are three different possibilities for supplying the energy requirements of such a plant using biomass:

  1. Feeding it with charcoal produced off-site.
  2. Producing charcoal on-site, with the carbonizer off-gas used either for (a) a co-fuel in the gasifier or (b) fed to the power-generation block as gas-turbine fuel.
  3. Direct feed of biomass (either raw or lightly processed) to the gasifier.
As case 2(a) comes close to case 3, and case 2(b) comes close to case 1, I'm not going to address case 2 any further and look only look at 1 and 3.

Case 1:  charcoal produced off-site.  This case comes closest to a feed of coal, with the difference that charcoal will have less intrinsic moisture (almost none) than coal.  Supplying 47.4 trillion BTU of energy with charcoal at 30 million BTU/ton requires 1.58 million tons/year of charcoal.  At a charcoal yield of .70 tons/ac, the production from 2.26 million acres would be required.  This is about 3530 square miles, or a circle about 34 miles in radius.  Allowing for non-cropland in the area, the plant could probably take the stover-derived charcoal from all the cornfields within roughly 40 miles.

Case 3:  biomass fed directly.  Supplying 47.4 trillion BTU of energy from biomass at 15.8 million BTU/ton requires 3.00 million tons.  At a dry biomass yield of 2.5 tons/ac, the production from 1.2 million acres would be required.  This is 1,880 square miles, or a circle about 24 miles in radius.  Allowing for non-cropland in the area, the plant could probably take the stover from all the cornfields within roughly 30 miles.

Energy sufficiency

A big question for sustainability is if a process can yield enough energy to run itself and still produce a surplus.  If the planting, cultivation and harvest of an acre of corn requires 6 gallons of diesel, the 87 million gallons of F-T fuel produced by the plant would suffice for 14.5 million acres of crops.  This is roughly 6.5 times the crop area required for case 1, and 12 times the crop area required for case 3.  This is an 540% to 1100% excess, which is clearly sustainable.

The other question is the nitrogen balance.  Corn is fertilized with an average of 77 pounds of nitrogen per acre.  The plant's production of 330,000 tons/year of nitrogen would suffice for 8.6 million acres of corn.  This is a 280% to 580% excess, which is also clearly sustainable.


The press reports do not specify the electric production expected from the repowered fertilizer (to become polygeneration) plant.  On the other hand, the production of charcoal would produce heat and off-gas with an energy content which can be estimated.  Turning 39.5 million BTU/ac of stover into 21 million BTU/ac of charcoal releases 18.5 million BTU as heat and gas.  If this energy can be turned into electricity at 50% efficiency, the processing of the stover from 2.26 million acres would yield 24.6 trillion BTU (7.21 billion kWh) of electricity.  This is an average of 823 megawatts.  A single stover-to-charcoal plant handling the product from 2.26 million acres could co-produce 0.18% of the nation's electric demand by itself.  The 80.7 million acres planted to corn in 2004 might fuel 36 such plants; these could produce 260 billion kWh/year, enough electricity to almost replace hydropower or displace 37% of the power produced from natural gas (data).

Carbon balance

The natural gas input to the original plant is not specified, but that never stopped me from guesstimating.  Production of 330,000 tons/year of fixed nitrogen would require 70,700 tons/year of hydrogen; produced from methane via partial oxidation of CH4 to CO + 2 H2 followed by shift conversion of CO + H2O to CO2 + H2, the process would consume 189,000 tons/year of methane and produce 520,000 tons/year of CO2.

The coal-fired polygeneration plant would produce quite a bit more.  The 1.9 million tons/year of coal would contain 1.24 million tons of carbon.  All of this would wind up as CO2, adding 4.54 million tons per year to the atmosphere.  The production of motor fuel and electricity would offset this somewhat.  The contribution from electricity is not quantified, but 87 million gallons/year of F/T diesel at 7.67 lbm/gallon would offset roughly 1.05 million tons of CO2 from petroleum.  The net CO2 contribution of the plant is roughly 2.97 million (4,540,000 - 520,000 - 1,050,000) tons per year, minus offsets from the unspecified electric production.

The carbon production of the biomass-fuelled plant would be a big fat zero.  To the extent that its F-T fuel production would displace 1.05 million tons/year of CO2 from petroleum, its net contribution would be negative.  Electric production would drive the total further into the negative.  If CO2 emissions credits were worth even $20/ton, the avoided cost would be about $59 million/year.

Farm income

The question of what biomass is worth is a good one.  Is it to be rated by its BTU value compared to a particular fuel, by the avoided carbon emissions, by avoided environmental contaminants?  It's hard to tell what farmers could or should be paid for.

Selling by BTU's (avoided cost) is relatively direct and simple.  If coal costs $30/ton at the plant, the plant is paying $1.20 per million BTU.  A farmer reaping 2.5 dry tons/ac of stover at 15.8 million BTU/ton could gross another $47.40/acre (minus harvest and transport costs), equivalent to about an extra 30¢/bu in the price of corn.  Compared to current prices of ~$2.50/bu, this is significant.

If other fuels are being displaced, this figure could go considerably higher.  Natural gas is currently running over $12/million BTU wholesale.  If carbonizer heat and off-gas is worth $8/million BTU as input to a gas-turbine generator, the 18.5 million BTU/ac from the carbonizer would be worth a whopping $148/ac.  If the farmer could get 50% of that, it would pay another $74/ac, or roughly another 50¢/bu; this might make farming highly profitable.  Sales of the .7 ton/ac of charcoal (worth about $21/acre at coal prices) to coal consumers might pay for the carbonization process, or it could be returned to farmers as fuel to heat homes and barns.  The potassium and phosphorus in the ash would be right where it needs to be to close the cycle.

What it can't do

We're clearly not going to fuel the nation from crop wastes.  87 million gallons per plant times 36 plants is only 3.1 billion gallons per year, a minuscule fraction of our 139 billion gallon/year gasoline appetite.  Even if yields were sextupled through e.g. the growth of switchgrass or Miscanthus at 15 tons/acre we would only get to about 30% of distillate fuel consumption or 9.3% of total motor fuel consumption.  The outlook for electricity would be rosier, but it would still not come close to replacing coal.

But that's not so bad; it would lay the groundwork for more efficient systems to follow, and by itself it would be a very promising start.

"But that's not so bad; it would lay the groundwork for more efficient systems to follow, and by itself it would be a very promising start."

Yes, that isn't so bad and this seems like a pretty good way to make use of a sustainable, domestically produced and carbon neutral fuel source. The net GHG and energy yields from this process are amazing. Thanks for doing the math on this one (again) and showing exactly how good they are (or roughly anyway, these are estimates of course).

Also, you only considered corn stover for input. There are a lot of other biomass sources out there. The DOE and USDA estimate (in the Billion Ton Vision report) that 428 million dry tons of crop waste and 337 million dry tons of perennial crops (not to mention the 87 million dry tons of grains that couldb e used for biofuels and 106 million dry tons of animal manures, process residues and other miscelaneous feedstocks from agriculture) could be sustainably harvested every year without cutting into our food production. They also estimate another 368 million dry tons of biomass that could be harvested from forest lands. Your estimate only assumes 201.25 million dry tons of corn stover (80.5 million acres of corn at 2.5 dry tons per acre of stover). Needless to say, there's a lot of other biomass feedstock potential out there to feed operations like this as well.

You should really consider writing the senators/respresentatives from corn and other crop producing states and pitching this kind of plant as a jobs/economic bill that also happens to be great for domestic energy security and greenhouse gas reduction. I imagine Senator Barak Obama from Illinois would eat this shit up. Where is the downside of plants like this (unless you are Exxon-Mobil and who says they can't play this game too)?

This kind of integrated plant is very much a step in the right direction. If it was using biomass as a substitute for coal, it would be even better! I'm serious about pitching these numbers to the guys who make the decisions. Let's get these ideas outside of the blogosphere ecochamber. There's no good reason why this shouldn't be done. It just takes people who think a bit more innovatively about energy (and you seem to be one of them).

Danville? The article says East Dubuque, close to 300 miles away. But that makes more sense anyway - East Dubuque is on the Mississippi, so the coal can come in on barges. Danville just has I-74. Of course the coal shipping has huge impact on the energy balance and profitability for this plant.
Watthead: thank you for suggesting that Senator Barack Obama might eat this or any other form of shit - I'm open to the idea.

If you *must* drag in the govt, IL has another hack named Durbin who might be able to get something done too from his post as Senate Minority Whip. And we have another gem named Blagojevich in Springfield who'd take credit for every sunrise if he thought he could sell it.

Or if you'd like to work on the Republicans, there's always House Majority Leader Dennis Hastert from suburban Chicago. IL does have some clout in Congress.

But why not let free enterprise carry the ball? What lives by the govt dies by the govt. If this is as good as you all say, leave it alone and let it earn an honest living. Honest capital will follow.

Or if you'd like to pursue another angle, check this out -
This comment has been removed by a blog administrator.
J. Bowen:  Good catch on E. Dubuque; I must've been reading something else that referenced Danville at the time.  However, both cities are in the middle of corn country.

Government attention and encouragement can help get free enterprise going (not surprising, as government roadblocks are often used to shut it down in favor of actors with better political connections).  Getting a senator or two on board means that the likelihood of official obstruction is much lower, as are the risks.

Good link, but I don't see any reference to the finished research and I can't find anything with Google Scholar.  Do you have something?
Post a Comment

<< Home
Talk largely about energy and work, but also politics and other random thoughts

Mail Engineer-Poet

(If you're mailing a question, is it already in the FAQ?)

Important links

The Reference Library

Blogchild of

Armed and Dangerous

Blogparent of


The best prospect for our energy future:
Flibe Energy

January 1990 / February 2004 / March 2004 / June 2004 / July 2004 / August 2004 / September 2004 / October 2004 / November 2004 / December 2004 / January 2005 / February 2005 / March 2005 / April 2005 / May 2005 / June 2005 / July 2005 / August 2005 / September 2005 / October 2005 / November 2005 / December 2005 / January 2006 / February 2006 / March 2006 / April 2006 / May 2006 / June 2006 / July 2006 / August 2006 / September 2006 / October 2006 / November 2006 / December 2006 / January 2007 / February 2007 / March 2007 / April 2007 / December 2007 / January 2008 / May 2008 / June 2008 / August 2008 / October 2008 / November 2008 / December 2008 / February 2009 / March 2009 / April 2009 / May 2009 / June 2009 / July 2009 / August 2009 / September 2009 / October 2009 / November 2009 / December 2009 / January 2010 / April 2010 / May 2010 / June 2010 / July 2010 / August 2010 / September 2010 / October 2010 / November 2010 / December 2010 / January 2011 / February 2011 / March 2011 / April 2011 / May 2011 / July 2011 / August 2011 / September 2011 / October 2011 / April 2013 / November 2013 / December 2013 / January 2014 / February 2014 / March 2014 / April 2014 / July 2014 / August 2014 / September 2014 / October 2014 / November 2014 / February 2015 / April 2015 / October 2015 / March 2016 / April 2016 / May 2016 / June 2016 / July 2016 / November 2016 / December 2016 / February 2017 / May 2017 / June 2017 / September 2017 / October 2017 / November 2017 / March 2018 / May 2018 / June 2018 / October 2018 / December 2018 / January 2019 / March 2019 / June 2019 / October 2019 / November 2019 / March 2020 / June 2020 / December 2020 / March 2021 / April 2021 / May 2021 / July 2021 / January 2022 / February 2022 /

Powered by Blogger

RSS feed

Visits since 2006/05/11: